Syntec 6MA Z axis help


Results 1 to 2 of 2

Thread: Syntec 6MA Z axis help

  1. #1
    Member maynesy's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Syntec 6MA Z axis help

    Hi all need some help, we have a Syntec 6MA controlled CNC and trying to be able to set z height to material surface per job

    1. lower z axis to material height
    2. apply machine coordinates on that axis - (xy axis work this way but not z)

    but it gives me a negative value in the G54P1(G54) setting and it alarms out if trying to run job,
    but if I set the height manually in the G54P1(G54) to material thickness it works

    is there a way to use apply machine coords

    thank any help greatly appreciated

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    5433
    Downloads
    0
    Uploads
    0

    Default Re: Syntec 6MA Z axis help

    What happens when you set it to zero?

    Andrew Werby
    https://computersculpture.com/


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Syntec 6MA Z axis help

Syntec 6MA Z axis help

Syntec 6MA Z axis help