Need Help! Weihong NC300 controller


Results 1 to 3 of 3

Thread: Weihong NC300 controller

  1. #1
    Member waxy's Avatar
    Join Date
    Jul 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Weihong NC300 controller

    Good day.

    Have a new milling machine with a "Weihong NK300CX" controller, dont have the password.
    Any suggestions?
    Also need to change the soft limits once have access.

    Regards

    Similar Threads:


  2. #2
    Member SilverSibeMetals's Avatar
    Join Date
    Jul 2021
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Weihong NC300 controller

    I have a Weihong NK 260

    Try combinations of the letters on that run in a diagonal. Ours is FRWY or something like that. Top left to bottom right.



  3. #3
    Member waxy's Avatar
    Join Date
    Jul 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Weihong NC300 controller

    Many thanks, will revert.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Weihong NC300 controller

Weihong NC300 controller