Hard boring an outer race


Results 1 to 1 of 1

Thread: Hard boring an outer race

  1. #1
    Member
    Join Date
    Mar 2013
    Location
    usa
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Hard boring an outer race

    Any suggestions on hard boring the attached part. I would need to bore the .569 dia. and come down to the .6308 dia. and bore across and do the backside .569. I would like to do this all with one tool but have not been able to find a cbn or pcd tool to do this with. I also have to turn the OD which is not a problem but I would like to run it in a dual spindle and pick the part off that is the reason for wanting to use only one boring tool

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hard boring an outer race

Hard boring an outer race

Hard boring an outer race