AXYZ router cutting error


Results 1 to 1 of 1

Thread: AXYZ router cutting error

  1. #1
    jonkovach's Avatar
    Join Date
    Sep 2020
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default AXYZ router cutting error

    I uploaded a picture to show what I am experiencing.
    When my CNC is cutting, it will shudder a little bit (most times, not all), and all of a sudden it's out of alignment. It is cutting .5" to the left of where it should be. This is happening in the X and the Y direction.
    I have already contacted AXYZ tech support, but tech support told us we are running too fast (@75IPM). They recommended slowing it down. That doesn’t seem to make sense.
    Help!
    Thanks,
    Jon

    Similar Threads:
    Attached Thumbnails Attached Thumbnails AXYZ router cutting error-screen-shot-2020-09-23-3-25-a  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

AXYZ router cutting error

AXYZ router cutting error

AXYZ router cutting error