AXYZ router cutting error


Results 1 to 2 of 2

Thread: AXYZ router cutting error

  1. #1
    jonkovach's Avatar
    Join Date
    Sep 2020
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default AXYZ router cutting error

    I uploaded a picture to show what I am experiencing.
    When my CNC is cutting, it will shudder a little bit (most times, not all), and all of a sudden it's out of alignment. It is cutting .5" to the left of where it should be. This is happening in the X and the Y direction.
    I have already contacted AXYZ tech support, but tech support told us we are running too fast (@75IPM). They recommended slowing it down. That doesn’t seem to make sense.
    Help!
    Thanks,
    Jon

    Similar Threads:
    Attached Thumbnails Attached Thumbnails AXYZ router cutting error-screen-shot-2020-09-23-3-25-a  


  2. #2
    Jyrkilaurila's Avatar
    Join Date
    Mar 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: AXYZ router cutting error

    do my homework engineering class

    Hi,

    We had this cutting error and slowing down helped.
    All error codes for AXYZ:
    https://www.axyz.com/us/fault-recovery-en/



  3. #3
    Nancyennis's Avatar
    Join Date
    Aug 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: AXYZ router cutting error

    A new router cutting error has been discovered by an expert in the industry. This error can cause your machine to malfunction and may be costly for https://budgiebasics.com/how-to-crea...budgie-easily/. To prevent this, we recommend that you check with your supplier if they have updated their firmware version to fix these problems.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

AXYZ router cutting error

AXYZ router cutting error