Need Help! New to the Forum, Looking for some help with my 3018 CNC


Results 1 to 3 of 3

Thread: New to the Forum, Looking for some help with my 3018 CNC

  1. #1
    Member VisualExpressions's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default New to the Forum, Looking for some help with my 3018 CNC

    Hello all,
    I'm new to the forums and I am having issues with my 3018 CNC machine. I'm currently using Candle 1.1.7 to run it. My issue lies when trying to move all the axis, the machine hesitates.


    Here is a video of what i am talking about:
    https://drive.google.com/file/d/1nHy...ew?usp=sharing

    I tried 2 different boards as i have 2 for this machine. It does the same thing from the PC and also from the stand alone controller. If its not the boards. what could it be. my spindle is controlled from a separate power supply and controller, so its not controlled by the board.

    worked fine about 3 months ago but now its doing this. any help or input would be great. Thanks in advance.

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2012
    Location
    Mexico
    Posts
    190
    Downloads
    0
    Uploads
    0

    Default Re: New to the Forum, Looking for some help with my 3018 CNC

    Hello.

    First of all I´d suggest you check your power supply. It appears as if for every movement the voltage diminishes and the motors need to wait until power is fully restored.

    Try doing a circle and a square some 8 inches in size and measure looking for discrepancies and distortions. That is to see how well your motion controller is dealing with that problem.

    Post your results if possible.

    Regards.



  3. #3
    Member VisualExpressions's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: New to the Forum, Looking for some help with my 3018 CNC

    thank you BBMNet, I left it on all night and it seems to be working fine. It must be the power supply. I just ordered another and should have it by tomorrow. Ill see if that does the trick.

    Thanks for your help.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New to the Forum, Looking for some help with my 3018 CNC

New to the Forum, Looking for some help with my 3018 CNC

New to the Forum, Looking for some help with my 3018 CNC