Need Help! need help for Connect the machine to the laptop


Results 1 to 4 of 4

Thread: need help for Connect the machine to the laptop

  1. #1
    Member s7ega's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default need help for Connect the machine to the laptop

    Hello evryone
    I have a problem identifying the machine cnc3018 with cable for the laptop .
    When I connect the machine cable to the laptop. Windows does not recognize the machine. This message appears
    (( look at the picture ))

    Windows Message
    https://1.top4top.net/p_1402cvzj41.png

    Note . that when i run the machine with Offline remot operates without problems ..
    The cable also has no problems

    please help

    Picture of the control board
    https://2.top4top.net/p_14026st1s1.png

    Similar Threads:
    Attached Thumbnails Attached Thumbnails need help for Connect the machine to the laptop-2-jpg   need help for Connect the machine to the laptop-11-png  
    Last edited by s7ega; 11-05-2019 at 09:26 AM. Reason: Spell mistakes


  2. #2
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Re: need help for Connect the machine to the laptop

    Looks like you need to find the USB driver and install it. Nothing in the documentation that mentions that?
    A quick google bought up a post mentioning the CH340 driver. Ring a bell?



  3. #3
    Member BlueDomino's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: need help for Connect the machine to the laptop

    I had set up a similar 3018 machine not too long ago and that definitely looks like you are missing a CH340 driver, I would recommend checking out Techdiy's video on the 3018 cnc:



    He goes through a concise rundown of all the necessary steps.



  4. #4
    Member john-100's Avatar
    Join Date
    Mar 2007
    Location
    uk
    Posts
    2083
    Downloads
    0
    Uploads
    0

    Default Re: need help for Connect the machine to the laptop

    After looking at the photo of the board I think the board is based on the Arduino nano

    The circuit diagram of the original nano uses the FT232 USB to RS232 converter IC

    http://www.ba0sh1.com/wp-content/upl...noNano-3.3.png

    FT232 driver

    https://www.ftdichip.com/Products/ICs/FT232R.htm



    clones of the Arduino found on line use the CH340 which needs its own driver to be installed on the PC

    see

    https://learn.sparkfun.com/tutorials...40-drivers/all


    Have a look at the part number on 16 pin IC near the USB connector to see if they have used
    the CH340 or FT232R


    John



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help for Connect the machine to the laptop

need help for Connect the machine to the laptop