Need Help! CNC 6040 from china


Results 1 to 4 of 4

Thread: CNC 6040 from china

  1. #1
    Member mecanico3020's Avatar
    Join Date
    Oct 2018
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default CNC 6040 from china

    Hi all
    I want to improve my CNC spindle, I bougth a Laser 15w from eBay but I need know how connect it.
    the laser has control pwm and I want control the intensity from mach 3 software.
    could some one show me how I can wire this laser in my red board BSMCE04 from bit sensor

    thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails CNC 6040 from china-screenshot_20190921-134240-jpg   CNC 6040 from china-screenshot_20190921-131837-jpg   CNC 6040 from china-screenshot_20190921-131849-jpg  


  2. #2
    Activation process nitrozeus's Avatar
    Join Date
    Oct 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: CNC 6040 from china

    Well the spindle output on the chinese USB breakout pushes 0-10 volts to the spindle drive/vfd. I think the TTL on your laser driver is 0 to 5 volts? Could be wrong. There is a Laser Drive called a BlackBuck that has good documentation.
    This website should have something that you can use to figure it out.
    https://sites.google.com/site/dtrslasershop/



  3. #3
    Member mecanico3020's Avatar
    Join Date
    Oct 2018
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: CNC 6040 from china

    hi Nitrozeus

    I think the voltage of the card BSMCE04 bit sensor had 0-10v output, the laser voltage is 0-5v TTL/PWM input.

    I try to connect my laser in my CNC but I not sure how connect it.

    thanks, Regards



  4. #4
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    401
    Downloads
    0
    Uploads
    0

    Default Re: CNC 6040 from china

    It sounds like Nitrozeus has put you on the right track. basically you need a way to interface your different signal requirements and the Black Buck device looks like the go.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC 6040 from china

CNC 6040 from china

CNC 6040 from china