NCStudio not communicating with controller after fresh Windows XP installation

[antonyhoch]

Hi people, I wonder if anyone can shed any light on this issue. Just bought a new Chinese router recently and had it working fine, but there was issues with Windows XP so I decided to do a complete reformat and re-installation of XP with service pack 1. I reinstalled NCStudio (V8.0) and now NCStudio isn't talking to the controller. Everything moves on screen, but no movement on the router it's self and the spindle won't operate. Any thoughts on this?

Similar Threads:

• Which version of Windows will NCStudio work on?
• Mazak Super Turbo communicating to windows 7 PC
• Mazak Super Turbo communicating to windows 7 PC
• Mazak Super Turbo communicating to windows 7 PC
• Communicating with the KFLOP controller from a non Linux or Windows based computer

[CNCINDUSTRY]

I guess the motion control card's drivers are not installed properly.

[antonyhoch]

Hopefully the company I bought it from can provide me with a different version of NCStudio.

[karso123]

Hello antonyhoch,
Did u solve the problem because i have done the same and i have connected the same way but couldn't get it running. please help me.

[jason-weihong]

Hello antonyhoch,
Did u solve the problem because i have done the same and i have connected the same way but couldn't get it running. please help me.

I am from WEIHONG company, if you need help you can email me jason@weihong.com.cn