Help CN625 Syntec


Results 1 to 4 of 4

Thread: Help CN625 Syntec

  1. #1
    Member gawduriel's Avatar
    Join Date
    Apr 2019
    Location
    Piatra Neamt
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Help CN625 Syntec

    sorry for posting here, and sorry for admins, i apologize, but i need some help, i have at work, this machine, CN625, and my colleague, and he wants to fold the bed or table, on the machine, but this eror keep show up, he wants to rise the spindle so that he can fold the table to put new material to cut, but like i said this error keeps pop up if he is trying to raise the spindle and cannot fold the table, or tipp( sorry for my english) waiting for someone to respond!Help CN625 Syntec-67636734_370447626972604_6798302513620582400_n-jpgHelp CN625 Syntec-67372891_2298483677068945_4228077037245431808_n-jpg

    Similar Threads:


  2. #2
    Member gawduriel's Avatar
    Join Date
    Apr 2019
    Location
    Piatra Neamt
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Help CN625 Syntec

    please help, pm me, i inserted some pictures, of the machine, and the error is, if its not visible well:
    z axis positive software limit exceeded!



  3. #3
    Member
    Join Date
    Aug 2009
    Location
    Canada
    Posts
    645
    Downloads
    0
    Uploads
    0

    Default Re: Help CN625 Syntec

    So that error means you have exceeded to software limit for the z axis. You cannot raise it up beyond that without changing the software limit. Usually the software limit would be just before the hardware limit switch (where it homes). So if you think you have lots of hardware room to move, try to change parameter 883? Maybe? Be careful and try a very small change first and see if the absolute value at the error is different.

    Good luck.

    In case anyone is wondering, I'm the twin of the other gfacer on cnczone...


  4. #4
    Member gawduriel's Avatar
    Join Date
    Apr 2019
    Location
    Piatra Neamt
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Help CN625 Syntec

    thank u, for reply, it solved itself, but next time if the error show up i will try, thanks again for reply!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help CN625 Syntec

Help CN625 Syntec

Help CN625 Syntec