please help, pm me, i inserted some pictures, of the machine, and the error is, if its not visible well:
z axis positive software limit exceeded!
sorry for posting here, and sorry for admins, i apologize, but i need some help, i have at work, this machine, CN625, and my colleague, and he wants to fold the bed or table, on the machine, but this eror keep show up, he wants to rise the spindle so that he can fold the table to put new material to cut, but like i said this error keeps pop up if he is trying to raise the spindle and cannot fold the table, or tipp( sorry for my english) waiting for someone to respond!
Similar Threads:
- Need Help!- syntec 6ma
- Need Help!- syntec 6 ma
- Syntec 20A-6E
- Need Help!- Syntec CNC
please help, pm me, i inserted some pictures, of the machine, and the error is, if its not visible well:
z axis positive software limit exceeded!
So that error means you have exceeded to software limit for the z axis. You cannot raise it up beyond that without changing the software limit. Usually the software limit would be just before the hardware limit switch (where it homes). So if you think you have lots of hardware room to move, try to change parameter 883? Maybe? Be careful and try a very small change first and see if the absolute value at the error is different.
Good luck.
In case anyone is wondering, I'm the twin of the other gfacer on cnczone...
thank u, for reply, it solved itself, but next time if the error show up i will try, thanks again for reply!