Need Help! CNC 3040T Stepper MOTOR REPLACEMENT


Results 1 to 7 of 7

Thread: CNC 3040T Stepper MOTOR REPLACEMENT

  1. #1
    Activation process Fokyou's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default CNC 3040T Stepper MOTOR REPLACEMENT

    HI THERE ALL!

    I'm new in the CNC Machining WOrld And started Being interesested In that cause i need to engrave pet tags and id tags for mailboxes;

    I have one "noise" is in the x axis and comes from the stepper motor.(when i replace the stepper from the other axis works fine) The axis was bended and it was forcing the stepper damaging it... it still works but makes noise.

    In the stepper says "Anchuan Motor 57HD0401 - 15SB 1.8 2.0A N1801"

    Any Ideas For a replacement!?

    Similar Threads:


  2. #2
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    510
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3040T Stepper MOTOR REPLACEMENT

    If the noise is coming from the bearings, they are pretty easy to change.
    Pull the end covers off and have a look. You just need to be careful refitting teh new bearings.
    Easier than buying another motor.



  3. #3
    Activation process Fokyou's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3040T Stepper MOTOR REPLACEMENT

    HI Sterob;

    Do you mean the bearing from the stepper motor?

    The noise comes from the stepper for sure, i just don't know if i can buy new stepper on ebay cause all i can find have 3 amps and mine has 2 amp... I'm afraid of burning something.

    Best regards



  4. #4
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    510
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3040T Stepper MOTOR REPLACEMENT

    Yes, the bearings in the motor.
    Easy to change them.
    Pull the motor apart and spin the bearings by hand. If they are noisy, change them.

    Sent from my SM-G920I using Tapatalk



  5. #5
    Activation process Fokyou's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3040T Stepper MOTOR REPLACEMENT

    Can i replace them for one with more amps ? new one with 3 amps old one 2 amp



  6. #6
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    510
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3040T Stepper MOTOR REPLACEMENT

    You can but you will need to re-configure your driver so it can supply the same current as the motor is rated to.



  7. #7
    Member peteeng's Avatar
    Join Date
    Jul 2018
    Location
    dum dum
    Posts
    1028
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3040T Stepper MOTOR REPLACEMENT

    Hi Fokyou - You can use a 3A motor in place of the 2A motor. But it will only draw what the driver can supply. So the 3A motor will be supplied with 2A from the existing driver. So although the 3A motor will have more torque capability it will only produce 2/3rds the torque it could produce with a bigger driver. You will not damage the driver or the 3A motor...

    You say the axis is bent. Do you mean the linear axis or the motor shaft? Peter



  8. #8
    CNCINDUSTRY's Avatar
    Join Date
    Aug 2019
    Location
    guangzhou
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default

    I don't think replacing the bearings is a better choice than motor.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC 3040T Stepper MOTOR REPLACEMENT

CNC 3040T Stepper MOTOR REPLACEMENT

CNC 3040T Stepper MOTOR REPLACEMENT