Need Help! Chinese GRBL Board End Limit Switches


Results 1 to 5 of 5

Thread: Chinese GRBL Board End Limit Switches

  1. #1
    Member 1759adam's Avatar
    Join Date
    Jun 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Chinese GRBL Board End Limit Switches

    Good morning,

    I'm a new member of this forum and this is my first CNC build. I have assembled a TopDirect CNC Router from Amazon, everything works fine after about 8 hours of building.

    I have mounted Micro Limit Switches, Left and right on the X Axis, Front and back on the Y Axis and only 1 at the top of the Z Axis.

    The Limit Switches have Normally Open and Normally Closed pins on the bottom and a Common pin on the side.

    I have found many and varied diagrams for wiring them together in series, but my problem is that I have 3 pins to input to on the X Y and Z Limit pins on my Chinese Woodpecker (?) board.

    The X-Limit, Y-Limit Z-Limit and Serov inputs (which I assume should read Servo?) all have + - and S marked on them.

    Every other diagram for wiring limit switches to a Chinese Woodpecker Style board suggest only a + and - connection.

    Can anyone please offer advice on how I should wire/connect my limit switches?

    There is a picture of the board attached.

    Many thanks,

    Adam

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Chinese GRBL Board End Limit Switches-chinese-grbl-0-9-board-jpg  


  2. #2
    Member ZASto's Avatar
    Join Date
    Apr 2005
    Location
    Vanuatu
    Posts
    304
    Downloads
    3
    Uploads
    0

    Cool Re: Chinese GRBL Board End Limit Switches

    GRBL needs NO switches.
    On x and Y axis they should be in parallel.

    Chinese GRBL Board End Limit Switches-screenshot-2019-06-17-02-13-31-a

    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.


  3. #3
    Member 1759adam's Avatar
    Join Date
    Jun 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Chinese GRBL Board End Limit Switches

    Many thanks for your help.

    This is my first foray into circuit diagrams since school, 30 years ago, so I may come back with a few questions after I've looked at your diagram in detail.



  4. #4
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    1943
    Downloads
    2
    Uploads
    0

    Default Re: Chinese GRBL Board End Limit Switches

    NO switches are more prone to noise. Using NC switches is really no harder. All you have to do to use NC switches is invert the input in Grbl settings.



  5. #5
    Member ZASto's Avatar
    Join Date
    Apr 2005
    Location
    Vanuatu
    Posts
    304
    Downloads
    3
    Uploads
    0

    Default Re: Chinese GRBL Board End Limit Switches

    Quote Originally Posted by 109jb View Post
    NO switches are more prone to noise. Using NC switches is really no harder. All you have to do to use NC switches is invert the input in Grbl settings.
    And to add some resistors
    Should read the code, it is very well documented/commented.

    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Chinese GRBL Board End Limit Switches

Chinese GRBL Board End Limit Switches