PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T


Results 1 to 9 of 9

Thread: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

  1. #1
    Member mjmurphy99's Avatar
    Join Date
    Apr 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    Help on VFD Settings,
    I Have the PRT-E1500W 110V VFD USB CNCEST-6040T

    I have contacted the supplier and get no response if my setting are correct for this CNC.
    Can some one with the same Machine or knowledge of the setting can tell me if this is correct!

    I made some changes to the 199 d-codes and now it runs with pc and manual, were before the spindle would not, Manual or Mach3 PC.

    I got this list from the net but the post was for a 220V spindle and mine is 110V.

    I also could not change d072 => 1000 it is at 0000 now! is this a problem?
    I also noticed that d021 => 50 and other posts say 400 is this a problem?

    Can some one check there d-codes and compare. I really don’t want to take a chance that the codes are wrong before I start using this CNC.

    Thanks for any input.

    Similar Threads:


  2. #2
    Activation process kgoods's Avatar
    Join Date
    Jan 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    Take a look at this thread... the second post has a link to the most comprehensive manual I've seen on these VFD's.

    https://www.cnczone.com/forums/chine...s-use-ith.html

    Just click on the download button (for english or french) and get ready to be amazed! Be sure to thank etiennebertrand for taking the time to put this together!

    It appears that d072 has to do with the PID functions which you most likely don't have (it's a feed back sensor from the spindle) If d070 = 0 then don't worry about it as PID is not implimented.
    d021 appears to be the max freq for "multifunction mode"... not even sure what that is but it shouldn't have any effect unless you're using that mode.

    I have the same machine 110v 1500W (although it's a 6090 4 axis) but have not got it set up yet, need to build a bench. But I'm sure with the help of the manual I won't have any problems.

    Hope this helps!

    Also if you haven't seen this thread be sure to go through it as well, lots of good info.

    https://www.cnczone.com/forums/chine...698-cnc-4.html

    Last edited by kgoods; 05-03-2019 at 01:08 PM. Reason: Addition Info...


  3. #3
    Member mjmurphy99's Avatar
    Join Date
    Apr 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    Quote Originally Posted by mjmurphy99 View Post
    Help on VFD Settings,
    I Have the PRT-E1500W 110V VFD USB CNCEST-6040T

    I have contacted the supplier and get no response if my setting are correct for this CNC.
    Can some one with the same Machine or knowledge of the setting can tell me if this is correct!

    I made some changes to the 199 d-codes and now it runs with pc and manual, were before the spindle would not, Manual or Mach3 PC.

    I got this list from the net but the post was for a 220V spindle and mine is 110V.

    I also could not change d072 => 1000 it is at 0000 now! is this a problem?
    I also noticed that d021 => 50 and other posts say 400 is this a problem?

    Can some one check there d-codes and compare. I really don’t want to take a chance that the codes are wrong before I start using this CNC.

    Thanks for any input.

    This is the answer I got from my supplier warehouse in CA took 4 days to receive the 6040T CNCEST:
    SNIP ---------------------------------------------------------------
    Goodday
    thanks
    and I have ask factory and it will not effect the usage
    and please do not worry
    you just need to know how to manaul control or adjust and it is ok
    best regards
    SNIP ---------------------------------------------------------------

    I asked if the d-codes were ok they made the spindle work and Mach3 PC switch works know!
    The reply I was wanting was all correct d-codes 0 - 199 I will Run with these codes Attached for know.



  4. #4
    Member mjmurphy99's Avatar
    Join Date
    Apr 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    Ready to carve now!
    I'm really quite impressed with this CNCEST-6040T
    The table bed serves great! to attach my topper - (2) 5/8 particle board!!

    Attached Thumbnails Attached Thumbnails PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T-20190509_221437-jpg  
    Last edited by mjmurphy99; 05-14-2019 at 12:33 AM. Reason: update


  5. #5
    Member mjmurphy99's Avatar
    Join Date
    Apr 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    You must use a washer on the bolt to lock the head in the track.

    Attached Thumbnails Attached Thumbnails PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T-20190509_191513-jpg  


  6. #6
    Member mjmurphy99's Avatar
    Join Date
    Apr 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    Another bit of important info for mach3 install the instructions weren't clear at first but the English Crack! is to copy the correct files from "engraver" folder it creates to mach3 folder. Page 6 install manual Attached.

    https://www.ebay.com/itm/4AXIS-USB-C...72.m2749.l2649

    I'm overall very happy with this purchase. I think it is a great bargain for the cost!

    I wonder if the cost are going to increase now with Chinese Tariffs!!

    Attached Files Attached Files


  7. #7
    Member mjmurphy99's Avatar
    Join Date
    Apr 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    Dust Shoe and VAC installed! Works Great!

    Attached Thumbnails Attached Thumbnails PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T-20190531_211429-jpg   PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T-20190531_211719-jpg  


  8. #8
    Member mjmurphy99's Avatar
    Join Date
    Apr 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    First project with Diamond Drag Bit I'm amazed at this CNCEST accuracy The Dragons eye pupal is 1mm in diameter.
    I used Vectric Vcarve Desktop very nice program easy to learn.
    The drag bit was found on ebay very good bit! reasonable price.
    https://www.ebay.com/itm/6mm-MSS-DRA...72.m2749.l2649

    Attached Thumbnails Attached Thumbnails PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T-p1120994a-jpg   PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T-p1120993a-jpg  


  9. #9
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    383
    Downloads
    0
    Uploads
    0

    Default Re: PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

    Very nicely done..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T

PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T