Good morning everyone,

Finally after lurking around for years, I have been able to get a OMIOCNC X8 110v.

Very happy with the machine, but I have to 2 questions.

First question: Can someone please post the VFD setting for the black box?

I keep getting "E003" on the VFD. When I first received the machine, pushing buttons on the VFD, I believe I may have changed some settings.
Now here is the strange part; the spindle and vfd are working with mach. I get the error message AFTER the job is complete. I run my job, and when I reach the end of the G-Code that the spindle turns off, is when I get the error.

The other question; as I understand, these machine are running 1/2 step. Has anyone switched to full step, to get full torque out of the steppers?

I hope someone can help with the VFD issue at least.

Thanks in advance
--Alex

Similar Threads: