Ethernet motion card XHC MK3 ET T4s control panel

[honzabal]

Hello everybody
Can someone help me please?

I´ve recently bought from China two spindles simply ATC router with ethernet motion card XHC MK3 ET T4s card inside .
I did not give a detailed instruction manual for this card and it isn´t at www.cdxhctech/downloads
Could someone please help me with T4s config and explain to me what are the T1 T2 T3 T4 positiones? Is it something like the g54-g55 fixtures inside Mach3?
There says: config 4 tools positions the offset are machine data.What does it mean?
What does push cylinder location mean? What is purpose Push start X Push endX function? Take the ET motion card control over some mach3 functions ,which are then not available in Mach3, for example in Mach3 diagnostic page like an ESS card? For what exactly is the ToolNum box?

I´m totally newbie please help :-)Thanks a lot for any answer.

Regards Honzabal

Similar Threads:

• XHC Ethernet Motion control card
• G-Rex G100 Ethernet Motion Control
• Mach3 Motion card XHC 5th MK4-V 4 AXIS mach3 cnc motion control breakout board
• motion control card

[honzabal]

Hello once again
This is print screen my T4s config

Regards Honzabal