3020 800W watercooling USB CNC axis end limit upgrade


Results 1 to 3 of 3

Thread: 3020 800W watercooling USB CNC axis end limit upgrade

  1. #1
    Registered
    Join Date
    Jul 2016
    Location
    France
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default 3020 800W watercooling USB CNC axis end limit upgrade

    Hi all,

    I have receive my Chinese CNC some days ago.
    I'd like to add end limit switch on each axis.

    No problem for the switch placement and fixing, but I need you help and ideas on where to wire it on the main board of the controller.

    I guess it's on the Phoenix connector (see attached photos)
    I have slots available named :
    REV / MI1 / MI2 / MI3 / MI4 / Mo1 / +12V.

    Did someone can guide me for the switch wiring ?
    And if possible, on Mach3 settings (or a right link).

    I'll will use a Z prob too, I have buy a cheap molule on Ebay, if any one have information on how to wire it and set it in Mach3, thank you.

    Thank you in advance.
    Regards.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails 3020 800W watercooling USB CNC axis end limit upgrade-3020_main_board-jpg   3020 800W watercooling USB CNC axis end limit upgrade-3020_main_board_1-jpg   3020 800W watercooling USB CNC axis end limit upgrade-3020_main_board_2-jpg   3020 800W watercooling USB CNC axis end limit upgrade-3020_stepper_controller-jpg  

    3020 800W watercooling USB CNC axis end limit upgrade-3020_usb_controller-jpg  
    Last edited by 0JFK0; 05-18-2018 at 08:21 AM.


  2. #2
    Registered
    Join Date
    Jul 2016
    Location
    France
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: 3020 800W watercooling USB CNC axis end limit upgrade

    No one ?



  3. #3
    Registered
    Join Date
    Jul 2016
    Location
    France
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: 3020 800W watercooling USB CNC axis end limit upgrade

    Solved



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

3020 800W watercooling USB CNC axis end limit upgrade

3020 800W watercooling USB CNC axis end limit upgrade