6040 CNCEST USB problems


Page 1 of 2 12 LastLast
Results 1 to 20 of 36

Thread: 6040 CNCEST USB problems

  1. #1
    Registered
    Join Date
    Mar 2018
    Location
    Netherlands
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default 6040 CNCEST USB problems

    Hey All,


    Connected everything like it should installed Mach3 and put on the CNC openend the Mach3 software it says driver loaded but nothing works or responds.
    I did set the config as it should (double checked), still nothing.........
    No drivers cd or Manual was given, took a lot of searching the internet too find anything like plugins but non worked for me.
    Can someoone please help me i really want too enjoy my CNC. (Pic above is my USB card)

    Gr Mike

    Similar Threads:
    Attached Thumbnails Attached Thumbnails 6040 CNCEST USB problems-main-usb-jpg  


  2. #2
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Same board?:

    https://www.amazon.ca/Aluoflower-100.../dp/B0759KP1CV

    There appears to be a driver for it out there somewhere....

    try googling the board part number?

    A U-Tube video:


    Steve



  3. #3
    Registered
    Join Date
    Mar 2018
    Location
    Netherlands
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Thanks, a member send me the link to the files and it works like a charm....thanks again for the help ....now figuring everything els out.



  4. #4
    Registered
    Join Date
    Mar 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Hi Mike,
    Same situation on my side.
    Could you share the link and driver files you mentionned ?
    thank a lot !
    Antoine



  5. #5
    Registered
    Join Date
    Mar 2018
    Location
    Netherlands
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    https://madexp.com/2018/01/01/cnc-3020-usb/

    this should be it.

    Quote Originally Posted by aauffret View Post
    Hi Mike,
    Same situation on my side.
    Could you share the link and driver files you mentionned ?
    thank a lot !
    Antoine




  6. #6
    Member
    Join Date
    Apr 2018
    Location
    Russian Federation
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Hi Mike!
    I bought the same CNC, but another size (6040) and seller didn't sent any manuals, software or drivers. Can you share all this files with me?
    Regards,
    Igor



  7. #7
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Quote Originally Posted by MikeCorp View Post
    Hey All,


    Connected everything like it should installed Mach3 and put on the CNC openend the Mach3 software it says driver loaded but nothing works or responds.
    I did set the config as it should (double checked), still nothing.........
    No drivers cd or Manual was given, took a lot of searching the internet too find anything like plugins but non worked for me.
    Can someoone please help me i really want too enjoy my CNC. (Pic above is my USB card)

    Gr Mike
    Can you please send it to me? It sounds like power is at the motors, but nothing happens. My wife is still trying to figure out what I spent our money on


    Sent from my iPhone using Tapatalk



  8. #8
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    307
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Those boards do not control functions using discrete I/O functions in real time. Upgrade to a UC100 or UC300ETH

    https://cnc4pc.com/c76-uc300-multifunction-board.html and you will be able to run this with Mach3/4 or UCCNC.

    Please contact us in our website if you have questions.

    Arturo Duncan
    https://cnc4pc.com



  9. #9
    Member vondeliusc's Avatar
    Join Date
    Dec 2007
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Since we are on this CNCEST USB board, my table works fine for XYZA, but the spindle controller cannot receive a M03 from Mach3.
    When you click spindle on, it spins up, and click spindle off, it de-energizes.
    It has recognized an M03 and M05 in the past, but just for a short period.
    Any ideas?
    -Christian
    6040 CNCEST USB running on Mach3 with the RnRMotion.dll plugin



  10. #10
    *Registered User* hengrave's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Hi. Did you get it working. I have the same problem and am looking for answers.
    Thanks for any help you can give me.
    Regards.
    James



  11. #11
    *Registered User* hengrave's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Hi.
    Could you send me the files please.
    King regards.
    James



  12. #12
    Member vondeliusc's Avatar
    Join Date
    Dec 2007
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Still trying different things...

    Quote Originally Posted by hengrave View Post
    Hi.
    Could you send me the files please.
    James
    Which files?



  13. #13
    Member vondeliusc's Avatar
    Join Date
    Dec 2007
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Quote Originally Posted by hengrave View Post
    Hi.
    Could you send me the files please.
    King regards.
    James
    James-
    Figured it out yet?
    I have: PM me if you need help.
    -Christian



  14. #14
    *Registered User* JohnLeslie's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Not sure if this is where to start, but it seems that many are seeking files to get there 6040 CNC to talk with their PC. Same issue. No connection. Just got this thing put together and cannot get it to do a thing?



  15. #15
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Quote Originally Posted by JohnLeslie View Post
    Not sure if this is where to start, but it seems that many are seeking files to get there 6040 CNC to talk with their PC. Same issue. No connection. Just got this thing put together and cannot get it to do a thing?
    Did you see post #5 in this thread?

    There's a link to a page with some info on it.

    Basically, you need to copy a 'plugin' ( for YOUR motion Card ) into your Plugin Folder in Mach 3, as well as having Mach 3 set up correctly.
    The Supplier SHOULD have given you a CD or a link where to find the file, but thats not always teh case.
    The file will be a "dll' file.



  16. #16

    Default Re: 6040 CNCEST USB problems

    Hi all

    I have purchased a similar Chinese CNC board from https://item.taobao.com/item.htm?spm...0-fae646b50642

    Follow the website instruction, I downloaded plugins and manuals (in Chinese), with google translation, I have connected the board to my step drivers. Initially testing with Mach 3, three step motors work, but I have failed to test with spindle. I can not run spindle by code M3 in Mach 3

    What I am not sure is my configure in Mach 3 (beginner in Mach 3)

    My setting is below pictures

    Connection to Inverter
    Inverter connection by huan_vcn, on Flickr

    Output setting in Mach 3
    Output setup1 by huan_vcn, on Flickr

    Plugins Config by huan_vcn, on Flickr

    Can anyone tell me something wrong in setting or how to fix the problems

    Thanks
    Huan.



  17. #17
    Member
    Join Date
    Jul 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Quote Originally Posted by MHE123 View Post
    Hi Mike!
    I bought the same CNC, but another size (6040) and seller didn't sent any manuals, software or drivers. Can you share all this files with me?
    Regards,
    Igor
    I just bought the same CNCEST 6040 USB version with 1.5kw spindle
    can you or anyone help
    I am new to cnc and I expected to have some support from the seller

    thanks



  18. #18
    Member vondeliusc's Avatar
    Join Date
    Dec 2007
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Quote Originally Posted by gcpcnc View Post
    I just bought the same CNCEST 6040 USB version with 1.5kw spindle

    I am new to cnc and I expected to have some support from the seller <<<"HA HA HAAAA...ya right"

    thanks
    If you have the RED USB board shown at the top of this post, this is the driver which will need to be copied into the \MACH3\Plugins directory:
    https://drive.google.com/open?id=1J7...cAn2oyuDmouP2U



  19. #19
    Member vondeliusc's Avatar
    Join Date
    Dec 2007
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Also need to copy this file https://drive.google.com/open?id=1Fx...82oOo_nj0Gq1JK
    to the \MACH3 directory for the proper settings.

    -Christian



  20. #20
    Member darkoford's Avatar
    Join Date
    Sep 2010
    Location
    Croatia
    Posts
    26
    Downloads
    5
    Uploads
    0

    Default Re: 6040 CNCEST USB problems

    Thanks Christian.
    Do you know what .dll for this BOB?

    6040 CNCEST USB problems-03_595_1_16_grande-jpg

    RnRMotion.dll not work.



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

6040 CNCEST USB problems

6040 CNCEST USB problems