Need Help! Help with JP-3163b controller


Results 1 to 7 of 7

Thread: Help with JP-3163b controller

  1. #1
    Registered
    Join Date
    Jul 2017
    Location
    Denmark
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Help with JP-3163b controller

    Hello,

    I have a SXCNC 6040 CNC with a JP-3163b controller using CNC USB Controller software to run it. So far the machine is up and running, even with end triggers. Now I would like to be able to control the spindle direction and speed from my laptop but I am having a lot of trouble with this.
    There is a guide for setting up the VFD which I have followed:



    So I should connect my analogue 0-10V output to the VFD as shown in the video. My first problem is that if I measure the voltage on the analogue output of the JP-3163b whilst changing the spindle speed from the software it only changes from 5-6V. Also, if I set the spindle speed to 0 in the software the analogue output jumps to 6V (Maximum).

    Here is a link to the JP-3163b:

    PakaHuszar: CNC Improvement 2. - Drawings, E-Stop, Probe

    Secondly, I have no output on the spindle relay pins no matter the software configuration.

    Any help with this would be greatly appreciated.

    Victor

    Similar Threads:


  2. #2
    *Registered User* ProtoMakerTech's Avatar
    Join Date
    Aug 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help with JP-3163b controller

    The vfd needs to be set for pwm not analog.



  3. #3
    Registered
    Join Date
    Sep 2005
    Location
    USA
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: Help with JP-3163b controller

    ProMakerTec,

    Can you explain further I have been trying to get mine working thru the software for well over a year with no luck.

    Thanks in advance.

    Walt



  4. #4
    *Registered User* Ry5649's Avatar
    Join Date
    Sep 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help with JP-3163b controller

    I have also been struggling with this same thing for what feels like forever. I have an identical setup to that video and it doesn't work



  5. #5
    Member 2418's Avatar
    Join Date
    Mar 2019
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Help with JP-3163b controller

    Same issue here with JP-3163b.
    The 0-10V output pin gives 5.0 to 5.93V.
    The inverter have a 10V, 5V and 20mA input.
    First I think, the 5V input is PWM. But this not work.
    Any ideas?



  6. #6
    Member 2418's Avatar
    Join Date
    Mar 2019
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Help with JP-3163b controller

    I drew a circuit. Let's see if that works then.
    //www91.zippyshare.com/thumb/hOF0NLPL/file.html



  7. #7
    Member KPasha's Avatar
    Join Date
    Jun 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help with JP-3163b controller

    The JP-3163D controller does not work! it had many design flaws, and was thus removed from production. The company further deleted all known versions of the manual and removed it from their manifest. The dangerous overcurrent will, in the long run, destroy the motors when used.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with JP-3163b controller

Help with JP-3163b controller

Help with JP-3163b controller