Weihong NK105G2 Mfr Password needed please.

[dsomers]

Hey folks!

Am new to the forum with a just arrived Chinese CNC machine. A Liaocheng Ray Fine Technology LTD 600x900 machine with a 1.5 kw spindle and a Weihong NK105G2 DST.

China's 10 day long Spring Festival just started (what we in the US call Chinese New Year) and they are not readily available for this question.

I was following their email for doing a z zero process on the machine. In order to enter in the thickness of the metal sensor plate they had me go into the DSP menu (using a hand console) to the Manufacturer Parameters and then they wanted me to go to the floating knife thickness entry. Unfortunately when I select the manufacturer parameter menu it asks for the mfr password, which of course I don't have.

Anyone out there familiar with this DSP and care to take a shot at the password?

The folks at Liaocheng have been terrific to work with BTW and I am delighted they get to take a 10 day holiday. Their absence is not an issue. I am just trying to keep making some setup progress while they are gone.

Thanks for any help you can offer!

Sincerely!

Dave

PS....I am in Seattle, WA and recently retired. My CNC and some other gear just arrived so I am working on the setup right now.

Thanks again!

Dave

Similar Threads:

• weihong nk300b
• Need Help!- Conversion from Weihong NK105G2 DSP Controller to GeckoG540 and Mach 3 on 4 axis rout
• Australia Weihong NK105G@ DSP Controller
• Password needed for Trumpf punching
• Weihong OS

[aarggh]

Hi Dave, if it's anything like the one I have, the password is "manufactory". Curious if this works for you too!

cheers, Ian

[dsomers]

Thanks Ian!

Unfortunately the DSP is accessed through a handheld keypad without any alpha components. Numeric control only, aside from various command symbols.

Appreciate your help though!!!

Dave

[MiG_RUS]

the default password to change the settings: 33587550

[RoverJ1530]

did this number Mig-RUS supplied work?

[Rward]

did this number Mig-RUS supplied work?

It worked for me on our Chinese made Baileigh 4 x 8 router

[kajal]

Thank you Mig..

[Mr-MaW]

It is difficult to see this system abroad, and only a few people in China use this CNC system again, the most is KND