IH Breakout Board


Results 1 to 4 of 4

Thread: IH Breakout Board

  1. #1
    Registered
    Join Date
    Apr 2004
    Location
    NY
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default IH Breakout Board

    I have one of the first IH machines. Breakout board for servos fried. Apparently Bob Campbell who supplied the original boards is no longer active. Does anyone have a source for a replacement board?

    Similar Threads:


  2. #2
    Member john-100's Avatar
    Join Date
    Mar 2007
    Location
    uk
    Posts
    2083
    Downloads
    0
    Uploads
    0

    Default Re: IH Breakout Board

    which BOB do you have ?

    if you can post photos and a link to the data sheet
    I expect the closest alternative could be a BOB from the likes of CNC4PC
    and a couple of power supplies mounted on a chassis the size of Bob Campbell's BOB
    and made into a drop in replacement


    if you lived in the UK I could of looked at it to see if its repairable
    provided the PCB tracks and any programmed PIC or Atmel chip are OK



    John

    PS
    is it like this ?
    IH  Breakout Board-campbell-designs-combo-board-jpg

    PPS
    I am thinking of something like CNC4PC's C11S and separate power supplies
    http://cnc4pc.com/Tech_Docs/C11S-R1%202_USER_MANUAL.pdf

    IH  Breakout Board-c11s-jpg

    if you need the 4th relay add a C37 relay

    IH  Breakout Board-c37-jpg

    Last edited by john-100; 11-26-2018 at 09:54 AM. Reason: add PPS


  3. #3
    Registered
    Join Date
    Apr 2004
    Location
    NY
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Re: IH Breakout Board

    yes, its the same the first listed..thank you ill visit that site.
    paul



  4. #4
    Member
    Join Date
    Jun 2005
    Location
    USA
    Posts
    1015
    Downloads
    0
    Uploads
    0

    Default Re: IH Breakout Board

    i'd switch over to a smooth stepper and modern controls for mach 3. make sure you get an ethernet breakout board



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

IH  Breakout Board

IH  Breakout Board