Ether1616 Outputs not working


Results 1 to 2 of 2

Thread: Ether1616 Outputs not working

  1. #1
    Member Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    578
    Downloads
    0
    Uploads
    0

    Default Ether1616 Outputs not working

    Hello,
    Iam trying to use the outputs of my Ether1616 board with Acorn and can not get any of them to work. Using the wizard i tried assigning an "OUTPUT1" to output 33 and did an mdi of M61 and also M94/61 but the led and relay does nothing. Also tried assigning a Custom Output of M94M95111 to the Ether1616 output 33 and did an mdi of M94/111 and nothing happens.
    Only time i can get an Ether1616 output to work is when using the <CTRL>, <ALT> and <f> button press on the Diagnostics Screen.
    Has anyone had this issue or know what iam doing wrong?

    Thanks,
    Troy

    Similar Threads:
    www.tsjobshop.com, www.homecncstuff.elementfx.com


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    US
    Posts
    1762
    Downloads
    0
    Uploads
    0

    Default Re: Ether1616 Outputs not working

    I suggest that you ask this question, along with a current report from your controller, on the Centroid Acorn support forum

    Gary Campbell GCnC Control
    Servo Control & ATC Retrofits


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Ether1616 Outputs not working

Ether1616 Outputs not working