- Need Help!- G41 G42 not working
-
Member
G41 G42 not working
I have a 1990 Bridgeport V2XT mill that I updated with an Allin1 control jan. 2020.
My problem is I can not get cutter compensation to work. I have wrote a small code to test and changed it up a couple of different ways and no luck.
I know you need to use a lead in line to start the compensation. Thanks for any help.
;tool offset
T6 M6
S1500 M3
G40
G20 G90 G17 G54
G0 X-2 Y2
G41 D6
G1 X-1 Y1 Z.050 F20
G1 X-1 Y0 Z-.100
X2 Y0
X2 Y-1.5
X0 Y-1.5
X0 Y0
M25
M05
Similar Threads:
Last edited by Bastard Thread; 07-26-2020 at 07:17 PM.
-
-
Member
Re: G41 G42 not working
What diameter value do you have in your offset library for D6?
-
Member
Re: G41 G42 not working
-
Member
Re: G41 G42 not working
I forgot to tell you, Iam a liar. HaHa.
I put 1/2" in the tool library not the offset library. All is great now and the learning curve continues.
CNCSNW thanks so much.
- Need Help!- G41 G42 not working
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules