Leadshine startup problems


Results 1 to 6 of 6

Thread: Leadshine startup problems

  1. #1
    Member Vyndicator's Avatar
    Join Date
    Jul 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Leadshine startup problems

    I'm beginning to feel a bit dumb. I can not get the Leadshine HBS86H hybrid step motor controller

    to work with the hybrid stepper motor. The motor is a Model 86HSE.5N-B32 model.

    First are these compatible?

    Second,where can I get help with my problem? Hope someone here.

    I am using an Acorn control board to control the step motor controller.

    I can make the motor on bench test jog CW and CCW but as soon as I stop jogging
    the motor the jerks about 1 turn and the Leadshine controller board goes into a following
    error (7 blips on the alarm LED). Only way to clear error is to unplug the controller.

    I have tried all kinds of different encoder wire hookups to no avail.
    Tried E mailing Leadshine with only a non deliverable response.

    Help!

    David Hoffman Canton Ohio

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    US
    Posts
    1736
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine startup problems

    "I'm beginning to feel a bit dumb. I can not get the Leadshine HBS86H hybrid step motor controller

    to work with the hybrid stepper motor. The motor is a Model 86HSE.5N-B32 model.

    First are these compatible?"


    Does the Leadshine manual or website list that drive as compatible for that motor, or visa versa?

    "I am using an Acorn control board to control the step motor controller."

    Which Acorn schematic are you using?

    "I can make the motor on bench test jog CW and CCW but as soon as I stop jogging
    the motor the jerks about 1 turn and the Leadshine controller board goes into a following
    error (7 blips on the alarm LED). Only way to clear error is to unplug the controller."


    What does the manual say is the error for 7 pulses?

    "I have tried all kinds of different encoder wire hookups to no avail.
    Tried E mailing Leadshine with only a non deliverable response."


    There is only one way to wire the motor and encoder. It is clearly shown in the Leadshine drive manual

    Gary Campbell CNC Technology & Training
    Control & ATC Retrofits
    GCnC411 (at) gmail.com [url]www.youtube.com/user/Islaww1/videos[/url]


  3. #3
    Member Vyndicator's Avatar
    Join Date
    Jul 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine startup problems

    Hello Thanks for the return.

    I have not found info on whether the drive and motor are compatible.

    I am using Acorn's rev 4 drawing S14975.dwg date 100227.

    The 7 LED pulse is a following error.

    Centroid has an Leadshine connection diagram but it is for a regular stepper not Hybrid.

    I will check the Leadshine connection again in the Manual

    Thanks VYNDICATOR



  4. #4
    Member
    Join Date
    Oct 2005
    Location
    USA
    Posts
    819
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine startup problems



  5. #5
    Member Ntl's Avatar
    Join Date
    Aug 2018
    Posts
    600
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine startup problems

    Did you try calling Leadshine? I had questions when I ordered my motors and gave them a call and talked to the tech for over a hour. He was very helpful and I had no problem getting ahold of them by calling them. Call them up the USA office is in Orange county here's the phone number 1-949-608-7270.

    Dan



  6. #6
    Member Vyndicator's Avatar
    Join Date
    Jul 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine startup problems

    Ok Dan Thanks...



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Leadshine startup problems

Leadshine startup problems

Leadshine startup problems