$$How much should i pay for a custom post for a CNC machine

[Szhu]

Hello everyone,

My company had recently purchase a Mazak QTN-250-II 2 Axis CNC Lathe and we don't have a post for it.

I found a person in our local area who can write a post for the machine and he is asking for $3000 Canadian. Since I don't know anyone else who is capable to do so, i can't really justify the price.

Does anyone know how much a custom post for a 2 Axis Lathe would cost?

Thank you very much for your kind response

Similar Threads:

• Need Help!- Looking for someone to make a post for Rhinocam 5axis custom machine
• Need Help!- Looking to build Powermill Post for a custom machine
• Need Help!- Custom Machine Process Definition / DATRON MCR Post
• Pay close attention:At the end of the year，laser machine and CNC machine discounts
• Post for custom machine

[pippin88]

What CAM software do you need the post for?

[Szhu]

What CAM software do you need the post for?

It is for MasterCAM.

[awerby]

You could switch to VisualCAD/CAM which includes lathe functionality. The program would cost less than $3000, and any posts you need would be configured for free.

[Szhu]

You could switch to VisualCAD/CAM which includes lathe functionality. The program would cost less than $3000, and any posts you need would be configured for free.

Thank you Awerby. I will look in to that.

However, do you have any idea how much it would cost to write a custom post for a similar machine?

[awerby]

If it's a post for VisualCADCAM, it will be free. But there might already be one. Mecsoft has been doing this for long enough that they've accumulated a pretty big library of postprocessors for all sorts of machines: https://mecsoft.com/downloadposts/ If you're talking about Mastercam posts, it seems the sky's the limit,..

[mactec54]

It is for MasterCAM.

Get one from Mastercam reseller. do you have live tooling, if not the average just 2 axis should be around $200