Aluminium Spheres


Results 1 to 3 of 3

Thread: Aluminium Spheres

  1. #1
    Member
    Join Date
    Mar 2005
    Location
    Canada
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Aluminium Spheres

    Looking to outsource some work starting with the following.

    2.000" (+/- .02) Aluminium sphere with a 0.850" (+/- .02) flat on one side. Drilled and tapped to M8 to M12 threads. Machined finish should be acceptable as long as it's comparable to what you'd get with a red scotchbrite. Material should be 6061 rod stock and likely it will be easiest and save on shipping if you provide it..

    Looking for pricing and delivery times on 25, 50 and 100 in each thread size. Better drawings and CAD models can be provided. If you have the equipment and can make the spheres in a M16 and adapters to get to the final sizes we need we also be interested in discussing that option and pricing.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Aluminium Spheres-s-l500-jpg  


  2. #2

    Default Re: Aluminium Spheres

    PM sent



  3. #3
    Member
    Join Date
    Mar 2005
    Location
    Canada
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: Aluminium Spheres

    You're not in Canada and although we will entertain providers from anywhere in the world you also didn't provide pricing.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Aluminium Spheres

Aluminium Spheres

Aluminium Spheres