Simple aluminum rings


Results 1 to 4 of 4

Thread: Simple aluminum rings

  1. #1
    Registered
    Join Date
    Apr 2014
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Simple aluminum rings

    I need a prototype of the attached file and then a production run of 25-100 in 1-2 months. Thickness is 2mm, but thickness can vary +/- 0.5mm. Needs to be a stiff aluminum. Not too picky about surface finish, but chamfered edges would be nice, depending on cost.

    Similar Threads:
    Attached Files Attached Files
    Last edited by upnorth65; 07-21-2016 at 06:51 PM.


  2. #2
    Registered
    Join Date
    Apr 2014
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Simple aluminum rings

    Needs to be 2mm +0.5mm (13awg-14awg).



  3. #3

    Default Re: Simple aluminum rings

    Hi There,
    Is the quotation still open? We are interested to provide quotation. We can be contacted through this email address sl.wong@prototree.com

    Thanks.

    BR
    /SL Wong
    Sales Manager
    Proto Tree LLC
    Website: www.protototree.com
    Email: sl.wong@prototree.com



  4. #4
    Registered
    Join Date
    Feb 2017
    Location
    United Kingdom
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Simple aluminum rings

    Hi,

    Are you still looking for suppliers for these parts? Please email me via enquiries@applegate.co.uk if you still need assistance.

    Kind regards

    Steve



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Simple aluminum rings

Simple aluminum rings