Camworks toolpath strange behaviour in 5 axis mode

[jlbergier]

Hello all,
I face a really strange tolpath behaviour with camworks.

In camworks simulation, toolpath OK.
In c!amworks virtual machine, toolpath OK when it mills.
In camworks virtual machine, toolpath NOK when entry / retract trajectory. It seems that the GCODE creating for entry / retract toolpath is not the good one, like it add an offset or take the wrong coordinate systems, something like that.

So the question is : How is it possible that the gcode generated is OK for normal toolpath but NOK for entry/retract toolpath ?? (Knowing that in the simulaton camworks, everything works fine)

I put some pictures to illustrate the issue.

Thanks

Similar Threads:

• Camworks in Solidworks assembly mode - cannot access camworks features
• Very Strange VSD-E Behaviour
• Strange Behaviour
• Mach3 Strange behaviour
• Strange behaviour of 10T