Sorry, both machines have HAAS controllers NOT fanuc.
We have 2 machines in house HAAS sl40 and HAAS vf6 (fanuc controllers) and all the machining is being done manually with the operator manually developing and inputting all the g-code.
We would like to automate this and are experimenting with camworks and solid edge. I, myself am new to all this machining and understand that I need post processors for both these machines to try and reduce the amount of work the operator sees even thou there may be some correcting of g-code that camworks and the post processor would develop.
I have been trying to locate post processors for these machines but am unable to find anything. So any help would be greatly appreciated during our experimentation process.
Thanks for any help that comes about.
Similar Threads:
- Hundreds of Mill and Lathe post processors for CAMWorks
- Need Help!- GibbsCAM Post Processors in Exchange for a working Hurco Hawk 30 and HAAS TM1 Post!
- Need Help!- GibbsCAM Post Processors in Exchange for a working Hurco Hawk 30 and HAAS TM1 Post!
- Hass VF6 how do you stop in middle of program
- Haas Post Processors
Sorry, both machines have HAAS controllers NOT fanuc.
Have you checked CAMWorks website they have posts available for download that are free?
Like this you mean?.
https://camworks.com/post-processor-library/
https://camworks.com/?s=post
All of 10 seconds to find. It's called: Google search.
These specific machines are not listed at the camworks website. I was trying to get more of a tuned post processor for the units.