Need Help! Post Processing issue


Results 1 to 1 of 1

Thread: Post Processing issue

  1. #1
    Member jnewton177's Avatar
    Join Date
    Mar 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Post Processing issue

    hi

    i am new to cam works, and i am trying to tap some holes on one of our older machines, and the post processor wont lent me output the tapping cycle in mm/Rev and keep outputting in mm/min
    but its just breaking the taps as it can accelerate fast enough out of the hole

    we used to have autodesk HSM which output in mm/rev for tapping and mm/min for drilling, but im pulling out my hair with it now =(

    the control is a YASNAC i80 (basically fanuc canned cycles)


    thanks in advance

    Here is an example of what i want it to look like in the

    Similar Threads:
    Attached Files Attached Files
    Last edited by jnewton177; 03-10-2021 at 02:07 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post Processing issue

Post Processing issue