Hi forum,
I have been working my way through tutorials and videos .. any I feel quite confident, however i am not getting the results as expected so looking for some guides:
from research- much of what i need to achieve will be via EC-Edit, and mostly via section:
I make all the mods to the file, save, go to UPG re-compile, the re-select CTL from Cam works in SW, pots process = Nadda- no change !!! at all.
Trying simple things such as Gettools (show all tools at start of tape) / remove G43 via first rapid move Z down
so here is what I have:
CTL file - C:\Program Files (x86)\UPG\ctl\SHERLINE2017MACH3.ctl
Mach3Sherline
GENERIC FANUC MACH3
136.65200mm
76.20000mm
SRC file:C:\Program Files (x86)\UPG\Millsrc\Sherline2017Mach3.SRC
when I open SRC file in EC edit i get this under library files:
:LIBRARY=C:\Program Files (x86)\UPG\Millsrc\Sherline2017Mach3.LIB
:LIBRARY=C:\Program Files (x86)\UPG\Millsrc\MILL.LIB
i modified Mill.LIB to show tools in start of tape section (no change)
Sherline2017Mach3.LIB did not have any sections - so added a section to use get tools (no change)
What the heck am i doing wrong here?
Similar Threads: