Problem G43 code in UPG


Results 1 to 2 of 2

Thread: G43 code in UPG

  1. #1
    Registered itolond's Avatar
    Join Date
    Jul 2013
    Posts
    84
    Downloads
    0
    Uploads
    0

    Angry G43 code in UPG

    Hi forum,

    due to my setup Tool offset is redundant (et. problematic) so I need to strip it out of my post processor

    for the life of me i have scoured the UPG to see where to remove it but not having much luck

    any guides (BTW generic Fanuc used)

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2009
    Location
    US
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: G43 code in UPG

    In the UPG go to sections, rapid moves, 1st rapid z down. Delete the <G:43>



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G43 code in UPG

G43 code in UPG