- Need Help!- Help We had a problem with the machine Mikron HSM 700
-
Registered
Help We had a problem with the machine Mikron HSM 700
We had a problem with the machine Mikron HSM 700
We were advised to turn to you
The problem is in the attached file which is sent to you.
I understand that we need a Root password for system reboot
See attached photos
Are you able to help us'll be very grateful
Similar Threads:
-
-
Registered
Re: Help We had a problem with the machine Mikron HSM 700
Dear sirs do you have postprocesor for ATEK PLUS.
Is it possyble to send me.
Best regards
office @profimold.com
-
Moderator
Re: Help We had a problem with the machine Mikron HSM 700
You'll to get this post processor from the CAD/CAM software supplier or ATEK directly.
Tech Support
CamSoft Corp.
support@camsoftcorp.com
PH 951-674-8100
Fax 951-674-3110
CNC Controller, PC Based CNC Controls
-
*Registered User*
Re: Help We had a problem with the machine Mikron HSM 700
Hello.
Clone the HDD to a image with DD or better.
Its possible, the HDD had bad sector.
Best regards.
- Need Help!- Help We had a problem with the machine Mikron HSM 700
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules