CamBam Arcs for Grbl?


Results 1 to 2 of 2

Thread: CamBam Arcs for Grbl?

  1. #1
    Member
    Join Date
    May 2004
    Location
    usa
    Posts
    210
    Downloads
    0
    Uploads
    0

    Default CamBam Arcs for Grbl?

    I am not a CamBam user but I have a customer that is trying to use it and getting invalid arcs. Is this a known problem? And, are there any solutions other than converting curves to straight segments?

    Similar Threads:


  2. #2
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: CamBam Arcs for Grbl?

    One common problem with G-code arcs is the incremental/absolute mode. Make sure the arc center mode is set the same in GRBL settings and in CamBam postprocessor settings.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CamBam Arcs for Grbl?

CamBam Arcs for Grbl?