newbie questions


Results 1 to 5 of 5

Thread: newbie questions

  1. #1
    Registered
    Join Date
    Apr 2007
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default newbie questions

    we are looking to buy a stinger 2 to make mostly hardwood parts. was looking to buy an atc, but see camaster seems to only offer a fast tc. are there other options? 3rd party??

    thanks.

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: newbie questions

    You can always buy an ATC spindle, and add it yourself, but you'll be on your own with getting the software setup to accommodate it.
    Otherwise, it looks like you'd need to step up to the Panther.
    I would think that the ATC option would add at least $5K to the cost.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3

    Default Re: newbie questions

    ATC option 5hp 6 tool adds $11500 for the Panther PT-404



  4. #4
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: newbie questions

    A chinese 5HP ATC spindle is $5000 for the spindle only.
    https://ugracnc.com/index.php/online...-kw-220v-iso30

    An HSD spindle would cost more. Add the cost of a carousel toolchanger, full integration, and factory support, and $11,500 isn't really all that much.
    ATC Spindles are not cheap.
    You can get a 7HP water cooled ATC spindle direct from China and do the integration yourself for $3500
    5.5KW BT30 ATC Spindle Motor Water-cooled 220V 18000rpm High Speed CNC Engraving | eBay

    By the time you add a VFD, build a tool rack, and add toolholders, you'll be over $5000, and probably have a LOT of time invested. And no factory support, or warranty on the spindle.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5

    Default Re: newbie questions

    Sorry... I should have mentioned that I was quoted for the Panther as an option.
    Im sure it does add on if going the other way you mention.

    Have a safe 4th!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

newbie questions

newbie questions