Cadkey 97....keyboard will not work after loading software on new Dell W7 pro


Results 1 to 2 of 2

Thread: Cadkey 97....keyboard will not work after loading software on new Dell W7 pro

  1. #1
    Registered
    Join Date
    Jul 2009
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Cadkey 97....keyboard will not work after loading software on new Dell W7 pro

    The software worked fine on old computer (mother board fried) which was also a Dell W7 pro setup. I can open prints but cannot edit anything. I can't change any line widths in the options;print/plot either. Can anyone help?

    Similar Threads:


  2. #2
    Member moldcore's Avatar
    Join Date
    Apr 2003
    Location
    USA
    Posts
    637
    Downloads
    0
    Uploads
    0

    Default Re: Cadkey 97....keyboard will not work after loading software on new Dell W7 pro

    You may want to look at this post:
    http://www.cnczone.com/forums/cadkey...7-problem.html



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cadkey 97....keyboard will not work after loading software on new Dell W7 pro

Cadkey 97....keyboard will not work after loading software on new Dell W7 pro