keycreator 2011 od threads


Results 1 to 2 of 2

Thread: keycreator 2011 od threads

  1. #1
    Registered
    Join Date
    Jan 2013
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default keycreator 2011 od threads



  2. #2
    Member moldcore's Avatar
    Join Date
    Apr 2003
    Location
    USA
    Posts
    637
    Downloads
    0
    Uploads
    0

    Default

    You can create a profile of the thread similar to a threading tool and then use the Create>Swept Solid>Helix and then use that to subtract from the cylinder. There is some made already under Tools>Fasteners>Stud if you need standard sizes.
    Helix/threads take up a lot of memory so they’re not used much CAD world.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

keycreator 2011 od threads

keycreator 2011 od threads