Just In New Proton Z axis ( plus - Retrofit info)


Results 1 to 2 of 2

Thread: New Proton Z axis ( plus - Retrofit info)

  1. #1
    Member
    Join Date
    Nov 2009
    Location
    USA
    Posts
    159
    Downloads
    0
    Uploads
    0

    Post New Proton Z axis ( plus - Retrofit info)

    Specs

    1606 true ball screw (lubed, double seal, double anchored)
    25MM rails (Lubed, twin triple seal with scraper on each)
    Servo soft limits available
    Magnetic breakaway (MAG-LOK v.2.)
    Powder coated sheet metal enclosure with quick access
    5/8" thick
    Torch bodies up to 2.00"
    Integrated with 800 RPM motor (When installed on Proton machine)
    Up to 4.5hp router capable
    Angular compass up to 65 degrees (from 0 to 60 degree angle cuts (infinite ratio)) available
    Twin pocket auxiliary tool pockets with 3 tapped holes for rigid tool bracket mounting


    Retrofit Proton Z axis includes all the the above except

    Integrated with 800 RPM motor (When installed on Proton machine)

    - - - Updated - - -

    This section intentionally left blank for picture reserve

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2009
    Location
    USA
    Posts
    159
    Downloads
    0
    Uploads
    0

    Default Re: New Proton Z axis ( plus - Retrofit info)

    New Proton Z axis ( plus - Retrofit info)-proton-z-axis-5-small-jpg



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New Proton Z axis ( plus - Retrofit info)

New Proton Z axis ( plus - Retrofit info)