3 phase power? Phases correct? It is possible to get the phase reversed which would run the hydraulic pump backwards and not produce any pressure.
Hi
Please need help with a romi g10 lathe with fanuc 21it manuals for fanuc and the machine.
I have a :2004 hydraulic low pressure
1002 emergency stop circuit fault
The hydraulic pump is working but no oil on any hose.
any help is appreciated
3 phase power? Phases correct? It is possible to get the phase reversed which would run the hydraulic pump backwards and not produce any pressure.
Hi Jim
Does the machine have a swarf conveyor or bar-feed as they could be interlocked with an e stop ?
check the phases on the machine
Is the white power light on ?