- VTX1 Defiance
-
Member
VTX1 Defiance
Retrofit to a Defiance VTX-1 with Delta Tau Control to Centroid Oak
Retrofit
Centroid Oak with custom tool changer PLC.
Machine
Spindle: Swiss TDM 30K rpm. Set to run @ 25K (original).
Spindle Drive Yaskawa. (original)
Spindle liquid cooled with chiller, automatic cycle.
Tool changer 12 position.
Tool Holders: ISO 10.
X,Y,Z Axis Drives Yaskawa. (original)
Computer
Industrial embedded fanless CPU module.
Industrial single unit LCD 15" display.
Windows 10, network ready.
Industrial bulkhead USB and network ports.
Elecronics
Circuit Breakers.
24 vdc logic, 2 each. one for relay logic, one for Oak and PC.
Safety Relays for E-stop and shutdown.
Most wiring to industry standard color codes.
Single power connection 220vac, 3 phase.
Documentation.
Complete electrical schematics.
Performance Specs
Rapid rate: 400 ipm.
Linear accuracy: 0.0002
Repeatability: 0.0002
Similar Threads:
Last edited by bptcontrols; 03-04-2022 at 11:15 PM.
Reason: misspell
-
-
Member
Re: VTX1 Defiance
Pictures of Defiance Delta Tau to Centroid
Last edited by bptcontrols; 03-04-2022 at 11:13 PM.
Reason: attach picts
- VTX1 Defiance
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules