Y axis moves minus but not plus

[daedalus0x1a4]

There is an older Bridgeport machine here and a few days ago the Y axis stopped moving plus. The handle still turns. For a time you could pull the table forward with your hands? Please advise, thanks.

Similar Threads:

• Axis moves in same direction
• Problem- axis goes plus or minus on it's own
• Need Help!- G54 X-axis moves??
• Y axis moves backwards on X3
• No A axis moves ? ( in post )

[daedalus0x1a4]

I guess the gib was clogged with chips so I removed the shim and cleaned it all out, works fine now.

Thanks.