More ballscrew pics
BTW, ballscrews when under belt tension ( whatever that # my be) takes less torque to move than my 1/4" click torque wrench can register. Here is pic of the sump with all the oil in it from the lubing, so I am hoping oil is getting to those screws
Any and all suggestions or thoughts are highly appreciated. My next steps will be redoing my Z axis calibration only in upward direction, some one on PM said that might help. With X axis I just bought a 22" encoder scale that will temp mount on table too see if longer than 3" moves will help. I might have screw mapping on my controller even though guys from machmotion are always telling me I don't but there is a screen on there that looks like it might just be it, so screen shoot soon to come.