Good source for motor replacements of Series I stepper motors?


Results 1 to 2 of 2

Thread: Good source for motor replacements of Series I stepper motors?

  1. #1
    Registered
    Join Date
    Oct 2006
    Location
    USA
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default Good source for motor replacements of Series I stepper motors?

    I have been fighting with an X axis final drive problem that has led me to suspect the X motor. Are there any good suppliers that have the right type of motors that could be used in conjunction with the original Y and Z motors without causing any problems? I should mention that I will need something that is compatible with Hillbilly's break out board. TIA,

    Ian

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2006
    Location
    USA
    Posts
    42
    Downloads
    0
    Uploads
    0

    Default

    These things show up on the E-bay auction site from time to time; that's where the motors from my machine went when I converted to servos. I don't see any on auction at the moment, but this guy lists them in his "E-bay store":

    http://cgi.ebay.com/Bridgeport-Stepp...QQcmdZViewItem

    $299 seems kinda spendy, though. If I recall, all three of my motors went for that total.

    Disclaimer: I have never done business with this seller.

    I should add, I believe that the X and Y motors are interchangeable, so you should be able to swap motors and see if the problem follows the motor before you spend mony on a replacement.

    Dennis



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Good source for motor replacements of Series I stepper motors?

Good source for motor replacements of Series I stepper motors?