1337/5000 TNC155: Data in RAM but inaccessible


Results 1 to 6 of 6

Thread: 1337/5000 TNC155: Data in RAM but inaccessible

  1. #1
    Member
    Join Date
    Aug 2011
    Location
    Usurbil
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default 1337/5000 TNC155: Data in RAM but inaccessible

    I have removed the batteries and cleared the RAM.
    When turning on the CNC, the message appears: "OPERATION PARAMETERS ERASED"
    I press EXT and the screen goes as in the photo, so far so good
    But, when I want to enter a value, what I type does not appear in the parameter value field, the "?" still comes out.
    If I enter a wrong value it warns me.

    If I put all the parameters on the keyboard or downloading from the PC, they are saved, I turn off the CNC, turn it on and everything is fine but when trying to edit them the same thing happens, that the list does not appear, only one parameter appears and with a value "?" and go to the parameter that goes exactly the same.

    If someone could help me, they will appreciate it very much.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails 1337/5000 TNC155: Data in RAM but inaccessible-img_20200426-jpg  


  2. #2
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    459
    Downloads
    0
    Uploads
    0

    Default Re: 1337/5000 TNC155: Data in RAM but inaccessible

    If you type in the correct value and press ent does the value change
    When you're accessing them do you put in the unlock code



  3. #3
    Member
    Join Date
    Aug 2011
    Location
    Usurbil
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: 1337/5000 TNC155: Data in RAM but inaccessible

    Thank you very much for answering

    I enter code 95148
    If in P01 I enter a correct value (when I am typing the numbers the "?" remains in the value) and I press ENT the parameter goes to P02 which also has the "?".
    If I go back to P01 it continues with the "?".
    If I entered an incorrect value I would get the message "INCORRECT VALUE ENTERED"



  4. #4
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    459
    Downloads
    0
    Uploads
    0

    Default Re: 1337/5000 TNC155: Data in RAM but inaccessible

    What happens if you load all parameters then reboot system



  5. #5
    Member
    Join Date
    Aug 2011
    Location
    Usurbil
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: 1337/5000 TNC155: Data in RAM but inaccessible

    The list of parameters does not appear, only one parameter appears and with a value "?"



  6. #6
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    459
    Downloads
    0
    Uploads
    0

    Default Re: 1337/5000 TNC155: Data in RAM but inaccessible

    Your batteries have failed
    When the parameters are loaded they would come up with a ? You would not be a me to go back it would come up with a ? Again
    Unless all the parameters are fully loaded



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

1337/5000 TNC155: Data in RAM but inaccessible

1337/5000 TNC155: Data in RAM but inaccessible

1337/5000 TNC155: Data in RAM but inaccessible