Need help...estop activated hit (key) to clear


Results 1 to 7 of 7

Thread: Need help...estop activated hit (key) to clear

  1. #1
    Member Kdub424's Avatar
    Join Date
    Jan 2020
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Need help...estop activated hit (key) to clear

    Having trouble with my Bridgeport ex trak dx mill..it was working just fine had just got done milling a slot on a shaft and plunged a hole
    to start the next key way slot. Turned off mill and water to clear off all shavings and water locked mill back down in place pressed the start button and nothing..looked at cnc and said emergency stop activated hit (key) to clear...doesnt say what key to hit just says hit (key) and sometimes will come up with message saying spindle motor overload..so I've hit every key...checked my e stops..all my brake levers are loose...motor is free...all wires connected and working..oiled all oil points..checked breakers...reset breakers...e stop button not actually activated but somewhere its tripped and cant resume my very busy list of jobs

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    538
    Downloads
    0
    Uploads
    0

    Default Re: Need help...estop activated hit (key) to clear

    Control type (Fanuc)?



  3. #3
    Member Kdub424's Avatar
    Join Date
    Jan 2020
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by drdos View Post
    Control type (Fanuc)?
    Not exactly sure

    Attached Thumbnails Attached Thumbnails Need help...estop activated hit (key) to clear-15784172706747375569477563703813-jpg   Need help...estop activated hit (key) to clear-15784173476545474620048478726836-jpg  


  4. #4
    Member Kdub424's Avatar
    Join Date
    Jan 2020
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Kdub424 View Post
    Not exactly sure
    this is the manual came with but says nothing about my problems

    Attached Thumbnails Attached Thumbnails Need help...estop activated hit (key) to clear-15784175473098061220240731235860-jpg  


  5. #5
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    538
    Downloads
    0
    Uploads
    0

    Default Re: Need help...estop activated hit (key) to clear

    Not Fanuc, I have no experience with this controller.



  6. #6
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    348
    Downloads
    0
    Uploads
    0

    Default Re: Need help...estop activated hit (key) to clear

    Check input power.. sounds like one leg of 3 Phase is low or not working. Converter problems?
    ......you might need a wiring diagram
    https://www.cnczone.com/forums/bridg...ak-wiring.html

    Last edited by machinehop5; 01-07-2020 at 11:23 PM. Reason: added link


  7. #7
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    397
    Downloads
    0
    Uploads
    0

    Default Re: Need help...estop activated hit (key) to clear

    Check your switches especially Z as that's where the normal problems occur



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help...estop activated hit (key) to clear

Need help...estop activated hit (key) to clear

Need help...estop activated hit (key) to clear