Bridgeport knee and colum Interacts TNC 151-155 Axis Drive Setup

[RMARCH]

I found this going through some of my paper work and thought it would come in useful to someone.
It is instructions for tuning axis drive boards X, Y and Z.

I hope it helps !!

Similar Threads:

• Problem- BP 760/22 DX Axis drive setup with Seimans Drives.
• Y AXIS drive in Bridgeport BMC 7-845
• Bridgeport Series II CNC with Z axis on the knee
• Video of Bridgeport that I retrofitted with EMC with knee motor, 4th axis etc
• Newbie- 5 axis for bridgeport style knee mill?

[Handi-andi]

That’s excellent thanks. Don’t suppose you have information about adding a fourth axis?

Thanks

Andrew


Sent from my iPhone using Tapatalk

[RMARCH]

[QUOTE=Handi-andi;2332974]That’s excellent thanks. Don’t suppose you have information about adding a fourth axis?

Thanks

Andrew

Hi Andy , So Sorry I do not have information about adding the 4th axis.