Bridgeport interact 412 machine parameter

[encapsulation]

Hello

I am having some problems whit my interact 412 whit tnc 2500, which has lost its machine parameters. I have a document whit the parameters written down, but the list starts whit: MP10 and the machine want to start whit Mp0 then MP1 and so on.. any suggestions what to do or where to get the missing parameters?


Have read the service manual and technical manual. Both of them start the parameterlist with MP10. So I Can't find any info on the lower parameters.

[RMARCH]

I have 2 Bridgeport interact 412's and the parameters both start with MP10 ..... I checked my 3 different parameter lists i have and they all start with MP10

[encapsulation]

I have now got the correct parameter-list from earlier owner and the machine is working.
strange thing is that the working parameter-list started whit mp0

Is my system something else than tnc2500 ?? or is it possible to have different parameter-lists for tnc 2500??

[RMARCH]

You may have a TNC151 because that parameter list starts with zero