Hidenhine 355 ,Bridgport (intract412)

[rahbar]

Hi all of my friends,
On of my best friends buy A milling cnc machine . It's a bridgport model intract412 with hidenhine control(TNC355) and made, and has this options: tool changer& Bush motors & drives for axis and fanuc drive for spindle, but it has problem: when start machine and going home,z & y axis go home but x moving to home but when touch limit stop x and text for x home stay on screen . I check input and its change from 1 to 0 on the control input (input on monitor),somtimes x home but sometimes x not home .no error on control.
can help me any one?
My email address is
h_rahbar56@yahoo.com
My phone to telegram or waths up is
00989151118093
Thanks for your help.
Hassan rahbar , mashhad, khorassan razavi , Iran

Similar Threads:

• Romi Bridgport
• Bridgport Interact 412
• wanna buy a bridgport?
• bridgport vmc hdd failure

[similarvegan]

An manila 1100 installed on bridgport intract 1 milling machine. Ereased parameters because Back up battery voltage low and when change it this problem occurs: spindle not started cw and ccw .Can you help me ?


____________________
super mario bros online

[hetlandeirik]

Did you get help for the problem with the x axis ? You shoul check the x axis lag. If the axis lag is to big the tnc will not cpmpleate the hpming process. You can check the lag by pressing mod and then down to position or display and chose lag. If lag is grather than the parameter set value,my case 0.01mm then homing will not complete.

Hi all of my friends,
On of my best friends buy A milling cnc machine . It's a bridgport model intract412 with hidenhine control(TNC355) and made, and has this options: tool changer& Bush motors & drives for axis and fanuc drive for spindle, but it has problem: when start machine and going home,z & y axis go home but x moving to home but when touch limit stop x and text for x home stay on screen . I check input and its change from 1 to 0 on the control input (input on monitor),somtimes x home but sometimes x not home .no error on control.
can help me any one?
My email address is
h_rahbar56@yahoo.com
My phone to telegram or waths up is
00989151118093
Thanks for your help.
Hassan rahbar , mashhad, khorassan razavi , Iran

[patriciabrown]

Please check if the installation is correct? Are there missing parts? minecraft classic

[Almsaliapools]

Almsaliapools for cleaning pool in Dammam
Our only goal is to excel in satisfying your needs for us
Where we provide you with our dear customer, quality and accuracy at the lowest prices and costs
We are waiting for you
To contact us on the numbers
966 54 888 2171
???????? ???? ?????? ??????? ???????

[runpro]

this is awesome

run 3