Replacing a Bridgeport Boss 8 EMC3 board with the right one.


Results 1 to 2 of 2

Thread: Replacing a Bridgeport Boss 8 EMC3 board with the right one.

  1. #1
    Registered
    Join Date
    Feb 2006
    Location
    usa
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default Replacing a Bridgeport Boss 8 EMC3 board with the right one.

    Has anyone replaced a Bridgeport Boss 8 Emc3 card?
    Most have caution labels.
    Opperator Control- xxxxxx
    Front pannel- xxxxxx

    Do the numbers have to match exactly?

    Similar Threads:


  2. #2
    Member danbeckergb4's Avatar
    Join Date
    Feb 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Replacing a Bridgeport Boss 8 EMC3 board with the right one.

    Have you made progress with Boss 8 EMC3 card. I have a Boss 8 with the FMDC(2) card. Would you consider upgrading to a different controller?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Replacing a Bridgeport Boss 8 EMC3 board with the right one.

Replacing a Bridgeport Boss 8 EMC3 board with the right one.