anyone using mcmaster's bridgeport ballscrew kit?

[leach.jared]

Mel,
Do you have any of the Ballscrew Kits for the Bridgeports available still?

[broussard]

Yes we do We have one set Left $825.00 for the set

Jeff

[79TigerPilot]

Jeff,
I got one of the sets from Mel last year, been very happy with it. The Y was a little short for my machine but was able to get it working anyway. I would still like to see if I can get another 660 mm section of the left hand 32mm FSV 5.08mm pitch lead screw from LeadTeam. I will reuse my nut and do my own end machining. Do you still have contacts with these folks? I tried to email them last year but never was able to get anythning going.

If I were to call them do they have have english speaking staff I could talk to?

Thanks,
Craig

[dmauch]

Do you still have precision ballscrew retrofit kits with a yoke for a bridgeport?
Dan Mauch

I have precision Ground Ball Screw kits for your mill accuracy .0005 per foot.
$825.00 complete.

Mel White

[VickTrinity]

Do you still have precision ballscrew retrofit kits with a yoke for a bridgeport?
Dan Mauch

I'm guessing not - this thread is quite old. I'm looking for ball screws for an old Bridgeport 9"x42" as well. Servo Products has a kit for $2347. I'm price shopping but not finding much.

George

[toyoman]

Try Winter Engineering in California, they sell Hiwin brand ballscrews for Bridgeports and clones. $1850 for a set with the corresponding yoke